Weihong Ncstudio Machine Vision Controller
|-- PCI ụgbọ ala interface;
|-- Mmalite ngagharị algọridim na mma machining mma;
|-- Nhọrọ nke mmepụta Pulse ugboro ugboro, 160KBit / s ma ọ bụ 1MBit / s;
|-- Ihe ngosi dị iche iche / ntinye ntinye na ntụkwasị obi ka mma;
|-- CCD Ndokwa akpaaka nwere ike iwepụ njehie nke nrụnye na ihuenyo silk;
|-- mbadamba agbatị na njikọ waya dị mfe;
|-- njedebe njedebe na ngwaike;
|-- Nkwado ọrụ nke Advance Start, Breakpoint Resume, MPG Wizard, Reverse Cutting, na na.
*Nnyefe megide ịkwụ ụgwọ. Ewepu fr8 na ọnụahịa.Swift koodu: MSBCCNBJ002
| Kaadị njikwa ngagharị | |
| PCIMC-6A | Servo ma ọ bụ nzọụkwụ |
| PCIMC-83A | Servo ma ọ bụ nzọụkwụ |
| axis | |
| Nọmba axis kacha | 3 |
| Interface onye ọkwọ ụgbọ ala Servo | |
| Mgbama ọnọdụ | Pulse/ntụziaka |
| Dị akara ngosi | Ihe dị iche |
| Gaa ugboro ole | 160KBit/s |
| Ihe ngbanwe akara efu | Ee |
| Mgbama mkpu Servo | Ee |
| Ọrụ mgbama Servo | Ee |
| bọọdụ gbatịrị agbatị (nwere ike ịdị iche na ụdị bọọdụ gbatịpụrụ) | |
| eriri servo | Ee |
| Mgbasa ozi breeki Z-axis | Ee |
| Ntugharị oriọna steeti ọrụ | oriọna na-acha uhie uhie/acha ndụ ndụ |
| Ntinye oke efu maka axis ọ bụla | Ee |
| Mgbanwe ndepụta akwụkwọ ntuziaka mpụga | Ee |
| Mgbanwe njikwa ntuziaka mpụga maka pasent nri nri na ntọala mmalite | Ee |
| Bọtịnụ mmalite/nkwụsị mpụga | Malite / Kwụsị |
| Njirimara ngwanrọ V9 | |
| Lee anya n'ihu | Ee, nwere ọgụgụ isi |
| Ogo faịlụ kacha | 2G byte |
| Nri pasentị | 0 - 120% |
| Spindle rev. pasent | 50 - 150% |
| ịme anwansị | Ee |
| Oru oru | Akpaaka/Serial/Mmụba/MDI / Ebe ntụaka |
| Ebe etiti akpaaka | Ee |
| Laghachi azụ ịkpụ | Ee |
| Akpa akpa akpa meghe/ mechie valvụ njikwa n'usoro | Ee |
| emeghe/emechi valvụ igbu oge | Ee |
| Igwe ọkụ ọkụ ọkụ ọkụ | Ee |
| Isiokwu Chinese | Bekee/Chinese (mgbanwe) |
| Akwụ ụgwọ | Nkwụghachi azụ/nchịkọta ndu/Quadrant |
| Dị Faịlị | |
| G koodu | Ee |
| Ụdị PLT | Ee, 2D/3D |
| Ụdị DXF | Ee |
| Ụdị ENG | Ee |
| ndị ọzọ na- | |
| ike ọkọnọ | 24v DC maka ọdụ ụgbọ mmiri I/O mpụga |
Weihong Ncstudio Machine Vision Controller V5.4.0
N'ime igbe okwu nrụpụta, anyị na-agbakwunye oke nke spindle. Anyị na-akwado nnukwu ọsọ nke spindle na igbu oge mmalite (nkwụsị).
Anyị na-akwado ọsọ nke spindle: ebe nchekwa nke ọsọ nke spindle na clew nke spindle.
N'ime onye ọkwọ ụgbọ ala pcimc3a, anyị na-agbakwunye nkwado wheel wheel.
N'ime igbe okwu nrụpụta, anyị na-agbakwunye oke nke wheel wheel.
A na-achọta ọnọdụ nke ngọngọ calibrate edozi na oke.
Anyị na-agbakwunye "simulate" na ogwe ngwaọrụ.
Anyị na-agbakwụnye "kpọmkwem ebe" na ngwá ọrụ mmanya.
Mechie oke axis Y n'ụdị tebụl swivel.
Anyị na-agbanwe ntuziaka ọnọdụ, ya mere ọ ka mma maka nhazigharị na ịkwaga na mmalite.
Weihong Ncstudio Machine Vision Controller V5.4.1
Ọ bụ nhazi maka "njikwa mmemme" wee gbasaa aha.
Anyị na-emeziwanye ikike nke ibu faịlụ na nbudata faịlụ. Anyị na-agbakwunye clew nke nhazi oge.
Weihong Ncstudio Machine Vision Controller V5.4.2
Ọ na-akwado mmezi mmezi yana nhazi ekwentị n'otu oge.
Anyị na-emezi igodo mkpirisi.
Weihong Ncstudio Machine Vision Controller V5.4.3
Ncinterp tinye nkwado nke faịlụ 3-D PLT, ọ nwere ike ịmata 2-D ma ọ bụ 3-D.
Ọ na-akwado ntuziaka okirikiri nke PLT.
Ọ na-agbakwụnye nkwado nke ntụziaka okirikiri nso.
Weihong Ncstudio Machine Vision Controller V5.4.4
Gbanwee ọnọdụ nke enweghị oke na igbe ozi mmemme igwe.
Mgbe ngwaọrụ laghachiri na mmalite, njedebe nke ịme anwansị
Weihong Ncstudio Machine Vision Controller V5.4.5
Gbanwee mmejọ nke aha ụzọ na faịlụ-jikwaa igbe.
Anyị na-agbakwunye ntuziaka G906 maka oke mmekọrịta yana ọnọdụ dị ugbu a.
Weihong Ncstudio Machine Vision Controller V5.4.6
Anyị na-emezi njedebe nke ngwanrọ. Ọ na-ezere nkwụsị mberede, ya mere ngwaọrụ nwere ike ịkwụsị nwayọọ nwayọọ.
Anyị na-agbanwe radii na dayameta na igbe nke na-agba ọsọ-machining-ntuziaka.
Weihong Ncstudio Machine Vision Controller V5.4.7
Anyị na-agbakwunye mgbanwe nke #SSCURWORKCOOR0, #SSURWORKCOOR1, #SSURWORKCOOR2, yabụ anyị nwere ike ịga na nhazi nhazi nke ugbu a.
Anyị na-eji ntụziaka otu nzọụkwụ dochie ntụziaka nke abụọ.
N'ime igbe faịlụ-jikwaa, a na-etinye nha faịlụ n'usoro ziri ezi. Anyị na-eji akara rịkọm na-ekekọrịta puku ọ bụla.
Numlock agaghị emetụta ọrụ mkpirisi.
Weihong Ncstudio Machine Vision Controller V5.4.10
Anyị na-edozi mmejọ nke mmeghari ohuru.
Anyị na-akwalite ikike ndezi nke MaskEdit.
Tọọ igodo ụzọ mkpirisi ka ọ bụrụ F12.
Weihong Ncstudio Machine Vision Controller V5.4.11
Gbanwee mmejọ nke igbu oge na ịmalite spindle.
Gbanwee otu mmejọ nke mmalite dị elu.
Weihong Ncstudio Machine Vision Controller V5.4.12
Gbanwee mmejọ nke ntuziaka-na-agba ọsọ, mgbe mmekọrịta nke G906 gasịrị.
Weihong Ncstudio Machine Vision Controller V5.4.13
Tinye mgbada ọsọ akpaghị aka nke oke ngwanrọ
Enweghị mmejọ ndị fọdụrụ na oke ngwanrọ.
Weihong Ncstudio Machine Vision Controller V5.4.14
Anyị na-agbanwe agba nke ederede site na ojii gaa na edo edo.
Tinye _UNIONCONDTION_IMMSTOP.
Weihong Ncstudio Machine Vision Controller V5.4.15
Mgbe ngwaọrụ kwụsịrị, ọ nweghị nsogbu nke flop ọsọ.
Weihong Ncstudio Machine Vision Controller V5.4.16
Tinye ọrụ nke nkwụsịtụ-gaa n'ihu na mmalite-mmalite na faịlụ PLT.
Anyị na-atụle naanị faịlụ machining dị ugbu a, mgbe ọnọdụ mmelite faịlụ.
A na-edobe oke ọsọ nke axis Z na oke nke igwe eletrik na ụlọ nrụpụta.
Enwere mgbada ọsọ na ọrụ otu nzọụkwụ.
Enwere ngwá ọrụ-bulite(ngwaọrụ-dobe) na nkwụsịtụ yana obere mmezi na NCBoard.
Weihong Ncstudio Machine Vision Controller V5.4.17
Ọ dị mma maka ịgba ọsọ ma ọ bụ gbadata ọsọ na ụdị ọhụrụ ahụ.
Weihong Ncstudio Machine Vision Controller V5.4.18
Ndozi ahụhụ: anyị na-agbanwe na 10 bits na axis ọ bụla na "kpọmkwem ebe".Mgbe anyị wepụrụ nọmba, ọ ka bụ 8 ibe n'ibe.
Enweghị mmejọ na igbu oge ka anyị gbanwee nkwụsịtụ.
Weihong Ncstudio Machine Vision Controller V5.4.19
Ọ nweghị ike gbanyụọ na Windows 2000 na XP ka emechara mmemme ahụ.
Anyị na-agbakwunye G992.Ọ bụ maka ọrụ nke n'usoro.
Anyị na-agbanwe mmejọ nke ọrụ CNcKernel :: LoadAxisErrorData.
Anyị na-agbanwe ntuziaka G00.
Anyị na-agbakwunye ntụziaka nke "gbanwee ntakịrị nkwụsị ozugbo".
Gbanwee ndudue: mgbe isi ihe dị ugbu a na njedebe, jiri ọrụ nke nloghachi-isi mmalite. Anyị agaghị eji JOG.
Anyị na-agbakwunye ọrụ igodo mgbapụ na mpio na-agba ọsọ ozugbo.
Anyị na-agbakwunye ihe omume pịa-bọtịnụ na ọnọdụ JOG.
Mgbe itinyere paramita na-ezighi ezi na windo calibrate, ọ nweghị ike ịgba ọsọ ọzọ.
Anyị na-emeziwanye windo enyemaka-oke ma ọ nwere ike ịgbanwe gaa na JOG ọnọdụ.
Weihong Ncstudio Machine Vision Controller V5.4.20
Gbanwee ọrụ nkwụsị mberede nwa oge.
Weihong Ncstudio Machine Vision Controller V5.4.21
Mgbe mpio a na-elekwasị anya abụghị 'edit', obere ahụigodo na-aghọ bọtịnụ ntuziaka.
Ahụigodo kwụsịtụ/nkwụsịtụ bụ ụzọ mkpirisi nkwụsịtụ.
ScrollLock bụ igodo ọrụ-aka-window-igodo.
Ụzọ mkpirisi F4 bụ ụzọ mkpirisi TraceView.
Anyị na-emeziwanye mgbakọ na mwepụ nke ahụigodo ntuziaka ọzọ.
Weihong Ncstudio Machine Vision Controller V5.4.30
Tinye igodo ụzọ mkpirisi '<', '>' n'ime windo nlele trace, iji kwado ọrụ mbugharị na mbugharị
Weihong Ncstudio Machine Vision Controller V5.4.32
Tinye nchekwa/bukwa ọrụ nhazi ọrụ
Weihong Ncstudio Machine Vision Controller V5.4.39
Tinye ọrụ nhazi mirror
Weihong Ncstudio Machine Vision Controller V5.4.41
Tinye ozi ịdọ aka ná ntị tupu ọ kubie ume
Weihong Ncstudio Machine Vision Controller V5.4.44
Tinye chọta, dochie na ọrụ ndị ọzọ na mkpirisi mkpirisi na windo ndezi faịlụ
Nkwado maka ụdị mgbasa ozi dị mfe
Weihong Ncstudio Machine Vision Controller V5.4.46
Ọrụ “Tọgharia” nkpuchi iji zere arụrụ arụrụ arụrụ arụ nke onye ọrụ (Jiri CTRL+F12 nwere ike ịkpọ ọrụ a)
Weihong Ncstudio Machine Vision Controller V5.4.47
Melite nsogbu: Enweghị ike ịmegharị agba na windo nlele anya
Melite nsogbu: Enweghị ọdịnaya dị na mpio oke ime
N'ihi ihe ụfọdụ, akagburu nbudata ahụ.
Onye ọ bụla chọrọ Weihong Ncstudio CNC Machine Onye njikwa ọhụụ V5.5.60 Mbido ENGLISH,
Alala azụ ịkpọtụrụ anyị.
